183
7. Recording Motion Pictures
4 Set the cropping end frame.
B Cropping end frame
5 Press the motion picture button (or shutter button)
to start recording.
C Elapsed recording time
D Set operating time
• Immediately release the motion picture button (or the
shutter button) after pressing it.
• When the set operating time has elapsed, recording
automatically ends.
To end recording midway, press the motion picture button
(or the shutter button) again.
∫ Changing the position and size of a crop frame
Press 2 while the recording screen is displayed, and perform steps
3 and 4.
∫ To cancel [4K Live Cropping] recording
Set [4K Live Cropping] to [OFF] in step
2.
To add zoom in/out effects, set different angles of view for the cropping start and
end frames. For example, to zoom in while recording, set a larger angle of view
for the start frame and a smaller angle of view for the end frame.
• The setting of the AF Mode switches to [š]. (The eye to be in focus is not indicated.)
• Brightness is measured and focus is done in the cropping start frame. During motion picture
recording, they are done in the crop frame. To lock the focus position, set [Continuous AF] to
[OFF], or set the Focus Mode to [MF].
• [Metering Mode] will be [ ] (Multiple).
Not available in these cases:
• This function is not available in the following cases:
– When [High Speed Video] is set
ュリヴヱハ
5HVHW
6HW
7
s
7
s
20
s
20
s
To Next Page
Loading...
Need help?
General
