211
9. Menu Guide
Applicable modes:
This will reduce the wind noise coming into the built-in microphone while maintaining
sound quality.
Settings: [HIGH]/[STANDARD]/[OFF]
Applicable modes:
This can reduce the power zoom operational sound produced during motion picture
recording.
• This function works only when an interchangeable lens that supports power zoom is used.
Settings: [ON]/[OFF]
[Wind Noise Canceller]
> [Motion Picture] > [Wind Noise Canceller]
• [HIGH] effectively reduces the wind noise by minimizing the low-pitched sound when a strong
wind is detected.
• [STANDARD] extracts and reduces only the wind noise without deteriorating the sound
quality.
• You may not see the full effect depending on the recording conditions.
• This function works only with the built-in microphone.
When an external microphone is connected, [Wind Cut] is displayed.
[Lens Noise Cut]
> [Motion Picture] > [Lens Noise Cut]
• When this function is used, the sound quality may differ from that during normal operation.
MENU
MENU
To Next Page
Loading...
Need help?
General
