9. Menu Guide
222
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
Indicates parts that may become white saturated through overexposure in a zebra pattern.
Select [SET] to set the brightness to be processed as a zebra pattern.
• You can select a brightness value between [50%] and [105%]. In [Zebra 2], you can select
[OFF]. If you select [100%] or [105%], only the areas that are already white saturated are
displayed in a zebra pattern. The smaller the value is, the wider the brightness range to be
processed as a zebra pattern will be.
[Highlight]
• If there are any white saturated areas, we recommend compensating the exposure towards
negative referring to the histogram and then taking the picture again.
• This does not affect the recorded images.
Not available in these cases:
• The highlight display does not work in the following cases:
– During 4K photo playback
– During playback of images recorded with the Post Focus function
– When thumbnails are displayed
– During Calendar Playback
– When the display is enlarged
[Zebra Pattern]
[ZEBRA1] [ZEBRA2]
• If there are any white saturated areas, we recommend compensating the exposure towards
negative referring to the histogram and then taking the picture.
• Displayed zebra patterns will not be recorded.
• If you assign [Zebra Pattern] to [Fn Button Set] in the [Custom] ([Operation]) menu, each time
you press the Fn button to which the setting is assigned, the zebra pattern toggles as follows:
[Zebra 1]
> [Zebra 2] > [OFF].
If you set [Zebra 2] to [OFF], the pattern toggles in the order of [Zebra 1]
> [OFF]
To Next Page
Loading...
Need help?
General
