229
9. Menu Guide
• If you are using Daylight Savings [ ], press 3. (The time will move forward by 1 hour.)
To return to the normal time, press 3 again.
• Set to [Home] when you have returned from your travel destination.
• If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
[Travel Date]
[Travel Setup]
If you set your travel schedule and record images, elapsed days (how
many days after) of the travel will be recorded.
[Location]
When [Travel Setup] is set, you can set your travel destination.
• For information on how to enter characters, refer to P64.
• You can display the elapsed days and travel destination during playback or stamp them on
recorded pictures in [Text Stamp].
• The elapsed days and travel destination can be printed out using the software
“PHOTOfunSTUDIO”.
• The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [World Time] to the travel destination, the travel date is calculated using the date in
the clock setting and the travel destination setting.
• When [Travel Setup] is set to [OFF], the number of days elapsed is not recorded. It is not
displayed even if [Travel Setup] is set to [SET] after recording.
• When the current date passes the return date, [Travel Setup] is automatically canceled.
• [Travel Date] cannot be recorded for AVCHD motion pictures.
• [Location] cannot be recorded in the following cases:
– When recording motion pictures
– When recording 4K photos
– When recording with the Post Focus function
To Next Page
Loading...
Need help?
General
