2. Getting Started/Basic Operations
50
∫ About the tilt sensor display
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.
• When the camera is tilted very little or not at all, the level gauge will turn green.
• With [Fn Button Set] in the [Custom] ([Operation]) menu, you can assign [LVF/Monitor Disp.
Style] to a Fn button.
Each time you press the assigned Fn button, the display style of the monitor or viewfinder
([ ]/[ ]), whichever is currently in use, will change.
• If no operation is performed, the information on the screen will gradually become darker after
approximately 10 seconds has passed, and will no longer be displayed after approximately
1 minute has passed.
Pressing the [DISP.] button or touching the monitor will make the display reappear.
This operation is to prevent screen burn-in and is not a malfunction.
A Horizontal direction: Correcting tilt to the left
B Vertical direction: Correcting downward tilt
• Even after correcting the tilt, there may still be an error of approximately n1°.
• When tilted significantly upwards or downwards to record, the tilt sensor display may not be
displayed correctly, and the Direction Detection Function may not work correctly.
To Next Page
Loading...
