77
3. Recording Modes
• [Long Shtr NR] is fixed to [ON].
• After an image for noise reduction is obtained, some menus are not displayed.
• The image for noise reduction will be discarded if the following operations are performed.
Follow step
5 again.
– Setting [Live View Composite]
– Changing the ISO sensitivity
– Switching to Playback Mode
– Starting motion picture recording
– Changing the Recording Mode
– Changing the drive mode
• When the shutter button is pressed fully to stop recording, the last image will not be included
in the combined image.
Not available in these cases:
• This function is not available in the following cases:
– When recording using the flash (only when [Flash Synchro] is set to [2ND])
– When recording in Burst Mode
– When recording 4K photos
– When recording with the Post Focus function
– When recording with the Bracket function
– When using [Filter Settings]
– When [Silent Mode] is set to [ON]
– When [Shutter Type] is set to [ESHTR]
– When [HDR] is set to [ON]
– When using [Time Lapse Shot]
– When using [Stop Motion Animation]
– When using [Multi Exp.]
To Next Page
Loading...
Need help?
General
