Panasonic PT-REQ15 - [Data Cloning]; [Save All User Data]

Chapter 4 Settings — [PROJECTOR SETUP] menu
184 - ENGLISH
Deleting the registered user image
1) Press as to select [USER IMAGE], and press the <ENTER> button.
f The [USER IMAGE] screen is displayed.
2) Press as to select [USER IMAGE 1], [USER IMAGE 2], [USER IMAGE 3] or [USER IMAGE 4], and
press the <ENTER> button.
f The [USER IMAGE] screen is displayed.
3) Press as to select [DELETE USER IMAGE], and press the <ENTER> button.
f The [DELETE USER IMAGE] conrmation screen is displayed.
4) Press qw to select [OK], and press the <ENTER> button.
f The selected user image is deleted.
Note
f If the user image is used in any of the following menu, the menu settings return to factory default settings when the user image is deleted.
g The [DISPLAY OPTION] menu → [BACK COLOR]
g The [DISPLAY OPTION] menu → [STARTUP LOGO]
g The [TEST PATTERN] menu
Changing the name of the user image
1) Press as to select [USER IMAGE], and press the <ENTER> button.
f The [USER IMAGE] screen is displayed.
2) Press as to select [USER IMAGE 1], [USER IMAGE 2], [USER IMAGE 3] or [USER IMAGE 4], and
press the <ENTER> button.
f The [USER IMAGE] screen is displayed.
3) Press as to select [RENAME USER IMAGE], and press the <ENTER> button.
f The [RENAME USER IMAGE] conrmation screen is displayed.
4) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 16 single-byte alphanumeric characters can be entered.
5) After the name is entered, press asqw to select [OK], and press the <ENTER> button.
f Changing the name of the user image is completed.
[DATA CLONING]
Perform the operation of the data cloning function. Data such as the settings and adjustment values of the
projector can be copied to multiple projectors via LAN or using the USB memory.
For details of operation, refer to “Using the data cloning function” (x page 257).
[SAVE ALL USER DATA]
Save the various setting values as a backup in the built-in memory of the projector.
1) Press as to select [SAVE ALL USER DATA].
2) Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
f The conrmation screen is displayed.
4) Press qw to select [OK], and press the <ENTER> button.
f [PROGRESS] is displayed while saving data.
Note
f The data saved by executing [SAVE ALL USER DATA] does not include the data set with “Geometric & Setup Management Software”.
f The data saved by executing [SAVE ALL USER DATA] is not deleted even if the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY
RESET] is executed.