Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 189
8) Press as to select [INITIALIZE].
9) Press the <ENTER> button.
f The conrmation screen is displayed.
10) Press qw to select [OK], and press the <ENTER> button.
Note
f To return the setting in the [PROJECTOR SETUP] menu → [LIGHT OUTPUT] to the factory default setting, initialize it by selecting [OTHER
USER SETTING].
f To return the setting of [Time zone] in [Adjust clock] of the web control screen and the setting of the [PROJECTOR SETUP] menu → [DATE
AND TIME] → [TIME ZONE] to the factory default settings, initialize them by one of the following methods.
g Initializing by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g Initializing by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
f If any of the following menu is set to [USER IMAGE 1], [USER IMAGE 2], [USER IMAGE 3] or [USER IMAGE 4] and are initialized by
selecting [USER IMAGE], the corresponding menu settings will be returned to factory default settings.
g The [DISPLAY OPTION] menu → [BACK COLOR]
g The [DISPLAY OPTION] menu → [STARTUP LOGO]
g The [TEST PATTERN] menu
[FIRMWARE UPDATE]
Rewriting of the rmware is possible by using a USB memory.
For details of operation, refer to “Updating the rmware using the USB memory” (x page 268).
[SAVE LOG]
This function is used by a service person.
[SERVICE PASSWORD]
This function is used by a service person.
To Next Page
Loading...
