EasyManua.ls Logo

Panasonic PT-REQ15 - Specifications

Panasonic PT-REQ15
316 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 7Appendix — Specications
ENGLISH - 293
Specications
The specications of the projector are as follows.
Display system
1-chip DLP projection system
Display device
Size of e󰀨ective display
area
20.3 mm (0.8") x 1 (aspect ratio 16:10)
Number of pixels
PT-REQ15, PT-REQ15L
2 304 000 pixels (1 920 x 1 200 dots)
when [QUAD PIXEL DRIVE] is set to [OFF]
9 216 000 pixels (3 840 x 2 400 dots)
when [QUAD PIXEL DRIVE] is set to [ON]
PT-REZ15, PT-REZ15L
2 304 000 pixels (1 920 x 1 200 dots)
Projection lens
Supplied projection
lens
PT-REQ15, PT-REZ15
Standard zoom lens
f Zoom magnication: 1.54 x
f Focal length: 23.9 mm to 37.2 mm
f F number: 1.84 to 2.31
PT-REQ15L, PT-REZ15L
Optional
Zoom
Powered
Focus
Powered
Lens shift
Powered (Horizontal/Vertical)
Changeable lens
Yes
Light source
Laser diode
Screen size
1.78 m (70") to 25.40 m (1000")
2.54 m (100") to 25.40 m (1000") with ET-C1U100
Light output
*1*2
15 000 lm when [OPERATING MODE] is set to [NORMAL]
12 000 lm when [OPERATING MODE] is set to [ECO] or [QUIET]
Contrast ratio
*1*2
25 000:1 when [DYNAMIC CONTRAST] is set to [3]
Center to corner zone ratio
*1
90 %
Displayable scanning frequency
PT-REQ15, PT-REQ15L
Horizontal 27 kHz to 291.6 kHz
Vertical 24 Hz to 240.0 Hz
PT-REZ15, PT-REZ15L
Horizontal 27 kHz to 148.1 kHz
Vertical 24 Hz to 120.0 Hz
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.
*2 This is the value when the Zoom Lens (Model No.: ET-C1S600) is used. The value varies depending on the lens.

Table of Contents

Related product manuals