Panasonic PT-REQ15 - Page 191

Chapter 4 Settings — [TEST PATTERN] menu
ENGLISH - 191
Changing the color of the cross hatch test pattern
1) Select the [TEST PATTERN] menu, and press the <ENTER> button.
f The [TEST PATTERN] screen (list format) is displayed.
2) Press as to select [CROSS HATCH], and press the <ENTER> button.
f The cross hatch test pattern and the [TEST PATTERN] screen (toggle selection format) are displayed.
3) Press the <ENTER> button again.
f The [TEST PATTERN COLOR] screen is displayed.
4) Press as to select a color, and press the <ENTER> button.
f The color of the cross hatch test pattern is changed to the selected color.
Note
f The [TEST PATTERN COLOR] setting returns to [WHITE] when the projector is turned o󰀨 and goes into standby mode.
f Colors of the test patterns other than cross hatch test patterns cannot be changed.