Chapter 4 Settings — [PICTURE] menu
ENGLISH - 99
[HDR ST2084-500]
Gamma mode compliant with SMPTE ST 2084 that assumes a highest luminance of 500 cd/m
2
and
supports HDR (High Dynamic Range).
[HDR ST2084-1000]
Gamma mode compliant with SMPTE ST 2084 that assumes a highest luminance of 1 000 cd/m
2
and
supports HDR (High Dynamic Range).
[HDR HLG]
Gamma mode compliant with ITU-R BT.2100 (HLG: Hybrid Log Gamma system) that supports
HDR (High Dynamic Range).
[1.8]
Set so that images become as you like.[2.0]
[2.2]
Note
f In the following cases, the gamma mode is automatically set based on the InfoFrame information while displaying the image with the
InfoFrame information added, so the gamma mode cannot be selected. If the information necessary for supporting HDR (High Dynamic
Range) is not included in the InfoFrame information added to the displayed image signal, it will follow the [GAMMA] setting.
g When the [DISPLAY OPTION] menu → [HDMI IN] → [AUTO GAMMA SELECT] is set to [ENABLE], and the HDMI input is selected
g When the [DISPLAY OPTION] menu → [DisplayPort IN] → [AUTO GAMMA SELECT] is set to [ENABLE], and the DisplayPort input is
selected
g When [AUTO GAMMA SELECT] under the [DISPLAY OPTION] menu → [SLOT IN] is set to [ENABLE], and the input corresponding to
that setting is selected
Setting [HDR HLG SYSTEM GAMMA]
Sets the system gamma to be applied to the [USER] and [HDR HLG] gamma modes. This system gamma is
dened by the ITU‑R BT.2100 standard.
1) Press as to select [GAMMA].
2) Press qw or the <ENTER> button.
f The [GAMMA] individual adjustment screen is displayed.
3) Press qw to select [USER] or [HDR HLG], and press the <ENTER> button.
f The [GAMMA] screen is displayed.
f When [HDR HLG] is selected, proceed to Step 5).
4) Press as to select [HDR HLG SYSTEM GAMMA].
5) Press qw to switch the item.
f The items will switch each time you press the button.
f [1.00] - [1.62] can be set in increments of 0.01.
Changing the [USER] name
1) Press as to select [GAMMA].
2) Press qw or the <ENTER> button.
f The [GAMMA] individual adjustment screen is displayed.
3) Press qw to select [USER].
4) Press the <ENTER> button.
f The [GAMMA] screen is displayed.
5) Press as to select [GAMMA NAME CHANGE].
6) Press the <ENTER> button.
f The [GAMMA NAME CHANGE] screen is displayed.
7) Press asqw to select the text, and press the <ENTER> button to enter the text.
8) Press asqw to select [OK], and press the <ENTER> button.
f The selected gamma name is changed.
Note
f The display of [USER] is also changed when the name is changed.
To Next Page
Loading...
