Chapter 4 Settings — [3D SETTINGS] menu
ENGLISH - 135
Select [9] or [10] for the rst projector.
Select [6], [7], or [8] for the second and subsequent projectors.
f Stereo synchronization is a signal having a 50 % duty cycle where High is for the left eye and Low is for the
right eye.
f “H” is output to the 3D image display and “L” is output to the 2D image display from the terminal for which
3D trigger output is selected.
Note
f [11] in [3D SYNC MODE] is the setting when the 3D IR transmitter TY-3DTRW (production discontinued) is used with the projector. Consult
your dealer regarding the connection method.
f The following settings are disabled and the contrast synchronization function and shutter synchronization function cannot be used when [3D
SYNC SETTING] is set to anything other than [OFF].
g The [PICTURE] menu → [DYNAMIC CONTRAST] → [USER] → [MULTI PROJECTOR SYNC]
g The [DISPLAY OPTION] menu → [SHUTTER SETTING] → [MULTI PROJECTOR SYNC]
g The [PROJECTOR SETUP] menu → [MULTI PROJECTOR SYNC]
f The [3D SYNC SETTING] setting is disabled and xed to [OFF] when the [PROJECTOR SETUP] menu → [MULTI PROJECTOR SYNC] →
[MODE] is set to anything other than [OFF].
[3D SIMUL INPUT SETTING]
Set this function when the 3D image signal in simultaneous format is input to the HDMI input.
1) Press as to select [3D SIMUL INPUT SETTING].
2) Press the <ENTER> button.
f The [3D SIMUL INPUT SETTING] screen is displayed.
3) Press as to select [HDMI IN].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] This is not used for 3D simultaneous input.
[AUTO]
Displays the 3D image in simultaneous format using the signals input to the <HDMI IN 1> terminal
and the <HDMI IN 2> terminal equipped on the projector as standard.
Note
f If this function is set to [AUTO], 3D image is displayed when the same 3D image signal is input to each input terminal.
f [3D SIMUL INPUT SETTING] cannot be set when the backup function is enabled in the [DISPLAY OPTION] menu → [BACKUP INPUT
SETTING] → [BACKUP INPUT MODE].
f This may not function properly depending on the connected external device.
f This may not function properly depending on the signal.
f Usage of each input signal is displayed in [HDMI1] and [HDMI2] of the [3D SIMUL INPUT SETTING] screen when [AUTO] is set.
r [3D SIMUL INPUT SETTING] screen
Usage of each input signal is displayed under the setting items of [HDMI IN] in the [3D SIMUL INPUT SETTING]
screen when [AUTO] is set.
Usage of the input signal Details
[LEFT INPUT] Uses the signal for the corresponding input as a signal for the left eye image.
[RIGHT INPUT] Uses the signal for the corresponding input as a signal for the right eye image.
[3D INPUT FORMAT]
Set the 3D format for the image signals being input.
Set a 3D format that matches the input signal.
1) Press as to select [3D INPUT FORMAT].
2) Press the <ENTER> button.
f The [3D INPUT FORMAT] screen is displayed.
3) Press as to select a 3D format.
[AUTO]
*1
Automatically detects 3D format of input image signals to display images.
[NATIVE] Forcibly displays 2D images regardless of input image signals.
To Next Page
Loading...
