EasyManua.ls Logo

Panasonic PT-RQ25K Series

Panasonic PT-RQ25K Series
345 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5Operations — Using the information monitor function
ENGLISH - 283
10) Press the <ENTER> button.
f Setting can be changed.
11) Press qw to switch the setting.
f The items will switch each time you press the button.
[ON] Select this item when the temporary IPv6 address is used.
[OFF] Select this item when the temporary IPv6 address is not used.
Note
f This setting item is common with the following menu item in the on-screen menu.
g The [NETWORK] menu [WIRED LAN] [IPv6 SETTINGS] [TEMPORARY ADDRESS]
r Connecting via wireless LAN
Set the wireless LAN function.
f To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module
(Model No.: AJ-WM50 Series) to the <USB> terminal.
1) Press as to select [SETUP].
2) Press the <ENTER> button.
f The sub-menu item is displayed.
3) Press as to select [NETWORK].
4) Press the <ENTER> button.
f The network selection item is displayed.
5) Press as to select [WIRELESS LAN].
6) Press the <ENTER> button.
f The current setting is displayed.
7) Press the <ENTER> button again.
f Setting can be changed.
8) Press qw to switch to [ENABLE].
f The items will switch each time you press the button.
[DISABLE] Select this item when the wireless LAN is not to be used.
[ENABLE] Select this item when the wireless LAN is to be used.
Note
f [WIRELESS LAN] cannot be set if the optional Wireless Module (Model No.: AJ-WM50 Series) is not installed in the <USB> terminal.
f This setting item is common with the following menu item in the on-screen menu.
g The [NETWORK] menu [WIRELESS LAN]
[STATUS] menu
Display the status of the projector.
1) Press as to select [STATUS].
2) Press the <ENTER> button.
f The sub-menu item is displayed.
3) Press as to select an item.
Sub-menu item Overview
[PROJECTOR] Displays the information of the projector.
[INFO MONITOR] Displays the setting information of the information monitor.
[NETWORK] Displays the setting information of the network.
[VERSION] Displays the rmware version of the projector.

Table of Contents

Related product manuals