Panasonic PT-RQ25K Series

Chapter 1 Preparation — Precautions for use
30 - ENGLISH
Note
f The SLOT adapter is used when the Intel
®
SDM Small (Intel
®
SDM-S) specication Function Board is installed in the slot on
the projector. (x page 61)
f The type and number of the supplied power cords vary depending on the country or region where you purchased the
product.
f The model numbers of accessories are subject to change without prior notice.
Optional accessories
Optional accessories (product name) Model No.
Projection lens
Zoom Lens
ET-D3LEW10, ET-D3LES20, ET-D3LET30, ET-D3LET40,
ET-D3LEW60, ET-D3LET80, ET-D3LEW200, ET-D75LE6,
ET-D75LE8
*1
, ET-D75LE10, ET-D75LE20, ET-D75LE30,
ET-D75LE40
Fixed-focus Lens ET-D3LEW50, ET-D3LEU100, ET-D75LE95
Fisheye Lens ET-D3LEF70
Stepping Motor Kit ET-D75MKS10
Lens Fixed Attachment ET-PLF10, ET-PLF20
Ceiling Mount Bracket
ET-PKD520H (for High Ceilings)
ET-PKD520S (for Low Ceilings)
ET-PKD521B (Projector Mount Bracket)
Function Board
12G-SDI Terminal Board
*1
TY-SB01QS
DIGITAL LINK Terminal
Board
*1
TY-SB01DL
Wireless Presentation
System Receiver Board
*1
TY-SB01WP
Wireless Module
*1
AJ-WM50 Series
*2
Early Warning Software
(Basic license/3-year license)
ET-SWA100 Series
*3
NFC Upgrade Kit
*1
ET-NUK10
Digital Interface Box ET-YFB100G
DIGITAL LINK Switcher ET-YFB200G
*1 The availability of this product varies depending on the country. For details, contact your dealer.
*2 The sufx of the Model No. differs depending on the country.
Example of the Model No. with sufx for AJ-WM50 Series
AJ-WM50E, AJ-WM50G1, AJ-WM50G2, AJ-WM50GAN, AJ-WM50GPX, AJ-WM50P
*3 The sufx of the Model No. differs according to the license type.
Note
f Use the Wireless Module (Model No.: AJ-WM50 Series) in an environment of 0 °C (32 °F) to 40 °C (104 °F), including when
it is attached to the projector.
f The Fixed-focus Lens (Model No.: ET-D75LE50) (production discontinued) can also be used.
f The Zoom Lens (Model No.: ET-D3LEW10, ET-D3LES20, ET-D3LET30, ET-D3LET40, ET-D3LEW60, ET-D3LET80,
ET-D3LEW200) is equipped with a stepping motor unit as standard.
f The Zoom Lens (Model No.: ET-D3LEW10, ET-D3LES20, ET-D3LET30, ET-D3LET40, ET-D3LEW60, ET-D3LET80,
ET-D3LEW200), the Fixed-focus Lens (Model No.: ET-D3LEW50, ET-D3LEU100), and the Fisheye Lens (Model No.:
ET-D3LEF70) are equipped with EEPROM (Electrically Erasable Programmable Read-Only Memory) with the information of
[LENS TYPE] written in.
f The Stepping Motor Kit (Model No.: ET-D75MKS10) is a product to replace the standard DC motor unit installed in the Zoom
Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30, ET-D75LE40) with the stepping motor
unit. For how to replace the motor of the Zoom Lens, refer to the Operating Instructions of the Stepping Motor Kit.
f When using the Zoom Lens (Model No.: ET-D3LEW200) or the Fixed-focus Lens (Model No.: ET-D3LEU100), it is
recommended to use together with the Lens Fixed Attachment (Model No.: ET-PLF20).
f When using the Fisheye Lens (Model No.: ET-D3LEF70), it is recommended to use together with the Lens Fixed Attachment
(Model No.: ET-PLF10).
f The optional NFC Upgrade Kit (Model No.: ET-NUK10) can be used to enable the NFC function of the projector. Note that
there are some models that have the NFC function enabled from the time of factory shipment, and there are some countries
or regions where the NFC Upgrade Kit cannot be applied.
For the availability of the NFC function in the country or region where you purchased the product, visit the following website
or consult your dealer.
https://panasonic.net/cns/projector/
f To connect the DIGITAL LINK Switcher (Model No.: ET-YFB200G) or the Digital Interface Box (Model No.: ET-YFB100G) to
the projector, it is necessary to install the optional DIGITAL LINK Terminal Board (Model No.: TY-SB01DL) in the slot.