Panasonic PT-RQ25K Series - [Administrator Account]

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 225
For the availability of the NFC function in the country or region where you purchased the product, visit the following website or consult your
dealer.
https://panasonic.net/cns/projector/
f The [NFC SETTING] setting is valid for the “Smart Projector Control” version 2.2.0 or later.
f For details of the “Smart Projector Control”, visit the following website.
https://panasonic.net/cns/projector/
[ADMINISTRATOR ACCOUNT]
Set the user name and password of the administrator account.
[PASSWORD POLICY]
Display a policy about the password of the administrator account.
1) Press as to select [ADMINISTRATOR ACCOUNT].
2) Press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
3) Press as to select [PASSWORD POLICY], and press the <ENTER> button.
f The [PASSWORD POLICY] screen is displayed.
PASSWORD POLICY
Reusing passwords is not recommended.
Password cannot be blank.
A password consisting of at least eight
half-width characters and contaning
characters of at least three of the
following four types is recommended.
Uppercase letters
Lowercase letters
Digits
Symbols (~!@#$%^&*()_+\|}{][<>.,/?`)
RETURN
MENU
Setting the administrator account for the rst time
Set the user name and password of the account with administrator rights.
1) Press as to select [ADMINISTRATOR ACCOUNT].
2) Press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
3) Press as to select [USER NAME], and press the <ENTER> button.
f The [USER NAME] screen is displayed.
f The factory default setting of the user name for the administrator account is set to “dispadmin”.
4) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 16 characters can be entered.
5) After the user name is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
6) Press as to select [PASSWORD], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
7) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 16 characters can be entered.
f A password cannot be blank.
8) After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.