Panasonic PT-RQ25K Series

Chapter 4 Settings — [PICTURE] menu
108 - ENGLISH
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x page 102) for the operation of the menu screen.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1) Press as to select [PICTURE MODE].
2) Press qw.
f The [PICTURE MODE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[STANDARD] The image becomes suitable for video signals in general.
[CINEMA] The image becomes suitable for movie contents.
[NATURAL] The image is sRGB compliant.
[DICOM SIM.] The image becomes similar to that of DICOM Part 14 Grayscale Standard.
[DYNAMIC] The image becomes suitable for use in bright areas.
[GRAPHIC] The image becomes suitable for computer signal input.
[USER] Set any desired picture mode.
Note
f The factory default picture mode is [GRAPHIC] for computer signal input and [STANDARD] for video signal input.
f DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.
f Press the <ENTER> button when each [PICTURE MODE] is selected to save as a specied value when a new signal is input. The data of
all items except [SYSTEM SELECTOR] in the [PICTURE] menu is saved.
f In the factory default settings, [USER] is set to images that comply with the ITU-R BT.709 standard.
Changing the [USER] name
1) Press as to select [PICTURE MODE].
2) Press qw to select [USER].
3) Press the <ENTER> button.
f The [PICTURE MODE] detailed screen is displayed.
4) Press as to select [PICTURE MODE NAME CHANGE], and press the <ENTER> button.
f The [PICTURE MODE NAME CHANGE] screen is displayed.
5) Press asqw to select the text, and press the <ENTER> button to enter the text.
6) Press asqw to select [OK], and press the <ENTER> button.
f The picture mode name is changed.
[CONTRAST]
You can adjust the contrast of the colors.
1) Press as to select [CONTRAST].
2) Press qw or the <ENTER> button.
f The [CONTRAST] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation Adjustment Range of adjustment
Press w.
The screen becomes brighter.
- 31 - +31
Press q.
The screen becomes darker.