Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 207
g Initializing by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
f The information of the self-signed certicate already generated in the [Certicate] page of the web control screen or the information of the
server certicate already installed can be deleted in the web control screen.
f Following settings are not returned to factory default settings even if the projector is initialized by selecting [FACTORY RESET].
g The [PROJECTOR SETUP] menu → [LENS] → [LENS INFORMATION SETTING] → [LENS ID] and [LENS NAME]
g The [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET
DARK]
f To return the settings of [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] in the [PROJECTOR SETUP] menu → [LENS] →
[ACTIVE FOCUS OPTIMIZER] to the factory default settings, execute the [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS
OPTIMIZER] → [FOCUS OFFSET SETUP] → [INITIALIZE].
f If initialized by selecting [FACTORY RESET], the [INITIAL SETTING] screen is displayed when the projection is started the next time.
Initializing the settings by selecting the items
1) Press as to select [INITIALIZE].
2) Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
f The [INITIALIZE] screen is displayed.
4) Press as to select [USER SETTINGS].
5) Press the <ENTER> button.
f The [USER SETTINGS] screen is displayed.
6) Press as to select an item.
[OPERATION SETTING]
The [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE] and [MAX
LIGHT OUTPUT LEVEL] are initialized.
[LIGHT OUTPUT] is not initialized. The [LIGHT OUTPUT] setting is maintained.
[STANDBY MODE]
The [PROJECTOR SETUP] menu → [STANDBY MODE] is initialized.
[REGISTERED SIGNAL] All the signals registered in [SIGNAL LIST] are initialized.
[NETWORK/E-MAIL]
All the setting items under the [NETWORK] menu and all the setting items under the operation page
in the [Detailed set up] page and the Crestron Connected of the web control screen are initialized.
f The items of [Time Zone], [Date], and [Time] in the web control screen are not initialized.
f The information such as the self-signed certicate already created in the [Certicate] page of the
web control screen or the server certicate already installed is not initialized.
[LOGO IMAGE] Image registered in [USER LOGO] is initialized.
[UNIFORMITY]
The [DISPLAY OPTION] menu → [UNIFORMITY] is initialized.
[CONVERGENCE]
The [POSITION] menu → [CONVERGENCE] is initialized.
[OTHER USER SETTING] The user data other than mentioned above are initialized.
7) Press qw to switch the setting.
f The items will switch each time you press the button.
[KEEP]
Does not return to the factory default settings and maintains the current settings when initialization is
executed by [USER SETTINGS].
[INITIALIZE] Returns to the factory default settings when initialization is executed by [USER SETTINGS].
f Repeat Steps 6) to 7) until the desired initialization items are set.
8) Press as to select [INITIALIZE].
9) Press the <ENTER> button.
f The conrmation screen is displayed.
10) Press qw to select [OK], and press the <ENTER> button.
Note
f To return the setting in the [PROJECTOR SETUP] menu → [LIGHT OUTPUT] to the factory default setting, initialize it by selecting [OTHER
USER SETTING].
f To return the setting of [Time Zone] in the [Adjust clock] page of the web control screen and the setting of the [PROJECTOR SETUP] menu
→ [DATE AND TIME] → [TIME ZONE] to the factory default settings, initialize them by one of the following methods.
g Initializing by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
To Next Page
Loading...
