Chapter 5 Operations — Updating the rmware
294 - ENGLISH
6) Select [I accept].
7) Click [Next].
f The connection setting screen is displayed.
8) Enter the setting details of the projector.
f Enter the details set in the projector to be updated.
Item Details
[IP Address]
The [NETWORK] menu → [NETWORK STATUS] → [WIRED LAN(IPv4)] → [IP ADDRESS]
[Command Port]
The [NETWORK] menu → [NETWORK CONTROL] → [COMMAND PORT]
[User Name] [User name] of the administrator account
[Password] [Password] of the administrator account
To Next Page
Loading...
