Panasonic PT-RQ25K Series

Chapter 7 Appendix — Specications
324 - ENGLISH
Input
compatibility
HDMI signal input
Video signal resolution:
480/60p, 576/50p to 4 096 x 2 160/60p
Computer signal resolution:
640 x 480 to 3 840 x 2 400 (non-interlace)
Dot clock frequency:
25 MHz to 594 MHz
DisplayPort signal
input
Video signal resolution:
720/50p to 4 096 x 2 160/60p
Computer signal resolution:
640 x 480 to 3 840 x 2 400 (non-interlace)
Dot clock frequency:
25 MHz to 594 MHz
SDI signal input
*1
HD-SDI signal, 3G-SDI signal, 12G-SDI signal
DIGITAL LINK signal
input
*2
Video signal resolution:
480/60p, 576/50p to 4 096 x 2 160/60p
Computer signal resolution:
640 x 480 to 3 840 x 2 400 (non-interlace)
Dot clock frequency:
25 MHz to 297 MHz
Connecting
terminal/slot
<HDMI IN 1> terminal
<HDMI IN 2> terminal
HDMI x 2, HDCP 2.3 compatible, Deep Color compatible
<DisplayPort IN>
terminal
DisplayPort x 1, HDCP 2.3 compatible, Deep Color compatible
<MULTI SYNC IN>
terminal
PT-RQ25K
PT-RQ18K
BNC x 1, TTL high impedance
<MULTI SYNC OUT>
terminal
BNC x 1, TTL output: Maximum 10 mA
<MULTI SYNC IN>
terminal/<3D SYNC 1
IN/OUT> terminal (dual
purpose)
PT-RZ24K
PT-RZ17K
BNC x 1, TTL high impedance
When [3D SYNC MODE] is set to output, TTL output:
Maximum 10 mA
<MULTI SYNC OUT>
terminal/<3D SYNC 2
OUT> terminal (dual
purpose)
BNC x 1, TTL output: Maximum 10 mA
<SERIAL IN> terminal D-Sub 9 p x 1, RS-232C compliant, for computer control
<SERIAL OUT> terminal D-Sub 9 p x 1, RS-232C compliant, for computer control
<REMOTE 1 IN>
terminal
M3 stereo mini jack x 1, for remote control (wired)/for projector connection control
<REMOTE 1 OUT>
terminal
M3 stereo mini jack x 1, for remote control (wired)/for projector connection control
<REMOTE 2 IN>
terminal
D-Sub 9 p x 1, for contact control
<LAN> terminal
RJ-45 x 1, for network connection, PJLink (class 2) compatible, 10Base-T/100Base-TX, Art-
Net compatible
<USB> terminal
USB connector (type A) x 1, for connecting the optional Wireless Module (Model No.:
AJ-WM50 Series), for connecting USB memory
<DC OUT> terminal USB connector (type A) x 1, for power supply only (DC 5 V, maximum 2 A)
<SLOT> SLOT x 1, Intel
®
Smart Display Module specication, for installing the Function Board
*1 This is supported when the optional 12G-SDI Terminal Board (Model No.: TY-SB01QS) is installed in the slot.
*2 This is supported when the optional DIGITAL LINK Terminal Board (Model No.: TY-SB01DL) is installed in the slot.