Parker TPDM - Applicable Standards; Materials and Disposal; Warranty

Parker Hannifin Manufacturing Srl user’s manual TPDM
11
1.8 Applicable standards
Safety
2006/95/EC
Low voltage directive
EN61800-5-1
Adjustable speed electrical power drive systems - Part 5-1: Safety
requirements- Electrical, thermal and energy
UL508C
(USA) Power Conversion Equipment
CSA22.2 Nr. 14-05
(Canada) Power Conversion Equipment
The drive is CE marked in accordance with the Low Voltage Directive when installed and operated
with reference to the product manual.
The drive is considered as a component in machinery. The complete machinery or installation may
only be put into service when in accordance with the safety considerations of the Machinery
Directive 2006/42/EC.
Electromagnetic Compatibility (Immunity/Emission)
2004/108/EC
EMC directive
EN 61800-3
Adjustable speed electrical power drive systems - Part 3: EMC
requirements and specific test methods
The drives are intended as components to be used in a second environment (industrial environment)
and category C3, together with specific EMC filters and installed accordingly to the
recommendations given in the user manual. When used in the first environment (residential /
commercial environment), drives may produce radio-frequency interference dangerous for other
equipment: additional filtering measures must be implemented by the user.
1.9 Materials and disposal
- zinc coated steel sheet, thickness 1mm and 2mm
- extruded aluminium AlSi
- adhesive polycarbonate (front label)
Electrolytic capacitor contains electrolyte and printed circuit boards contains lead, both of which are
classified as hazardous waste and must be removed and handled according to local regulations.
The Parker Hannifin Manufacturing Srl, together with local distributors and in
accordance with EU standard 2002/96/EC, undertakes to withdraw and dispose of its
products, fully respecting environmental considerations.
1.10 Warranty
The warranty duration is 1 (one) year. The converter must not be opened, accessed or modified in any
of its part. Any attempt to do so would cause the 1-year warranty to be cancelled with immediate
effect. Parker Hannifin declines any responsibility for damages that may be caused by inappropriate
use of the converter.