Parker TPDM - 6 Start-Up, Configuration, and Parameters; 6.2 Motor Type Selection

Parker Hannifin Manufacturing Srl user’s manual TPDM
46
The function “SAVE” and “LOAD” are referred to the axis selected (led on).
5.1.1 Alarm codes
FEr.01
SD file system doesn’t exist / SD broken
FEr.02
Impossible to open/create/delete the file/directory – SD empty
FEr.03
Impossible to add file, because the max number of files has been reached.
FEr.04
Impossible to load the parameters area from file .slv
FEr.05
Impossible to load the PLC area from file .slv
FEr.06
Impossible to load the Tab area from file .slv
FEr.07
Impossible to load the Tab1 area from file .slv
FEr.08
Impossible to load the Tab2 area from file .slv
FEr.09
Impossible to load the Tab3 area from file .slv
FEr.10
Reinsert the SD card
FEr.11
The SD card is protected, impossible to write
FEr.12
Impossible format FAT16 (size out of range: < 4,1MB or > 2GB)
FEr.13
Impossible to load the firmware
M
SAVE
/par/Pnnn.slv
From MEM
M
OK
nOK
MM
M
M
M
NO
d
et
ec
t
P
ro
te
c
t
M
M
M
M
+
-
+
-
File...
+
-
M
}
M
OK
nOK
M
NO
de
tec
t
M
0
files
M
+
-
Pr..
Save file
on SD
Load file
from SD
+
-
status
+
-
M
NO
detect
M
A B C
M + -
Axis selected
A B C
M + -
Axis selected
-
+
-
+
-
+
-
+
M
SAVE
/par/APnnn.slv
From MEM
M
To save the file into the axis, set bit
b99.14=1 and b99.15=1
M
Restart the
TPDM module
Select file
+
-