Parker Hannifin Manufacturing Srl user’s manual TPDM
2 INTRODUCTION
2.1 General information
This manual describes the installation and commissioning of the frequency converter TPD for
brushless motors.
Read carefully all the sections.
2.2 Product description
The TPD is a digital frequency converter for brushless motors and asynchronous motors (with or
without feedback). The operator interface based on parameters makes it easy to configure the
converter. Configurations of different kinds make it suitable for many applications.
The TPD converter allows controlling one, two or three brushless motors with a single converter.
This feature allows saving space into the electric panel in multi-axis configurations.
The drive includes a series of auxiliary functions that reduce the control electronics into applications,
with a considerable cost saving.
It uses widely diffused industrial programming standards and guarantees a high degree of freedom in
selecting inputs and outputs. The drive also offers the possibility to develop additional functions that
are not included in the basic functionality of the converter such as gain correction for loops based on
speed or space, monitoring the used torque for tool life control, etc.
It can be configured through the keyboard, the serial line or the CAN bus (via EtherCAT using an
optional card)
To Next Page
Loading...
