Parker TPDM - Programming with Motionwiz

Parker Hannifin Manufacturing Srl user’s manual TPDM
126
10.2 Programming with MotionWiz
The enclosed communication software (supplied free of charge) designated MotionWiz has
the following HW/SW requirements: PII microprocessor or higher, Windows2000 or more
recent version, mouse and serial port for drive connections. The main features of MotionWiz
are:
- serial connection of up to 32 axes
- reading and setting of basic parameters and drive commands
- reading and setting of commands and parameters of operating modes
- functional block diagrams
- pico-PLC program displayed as ladder diagrams
- display of pico-PLC program status during operation
- I/O status
- file storage of parameterisation including pico-PLC program
- uploading of parameterisation including pico-PLC program from a file that can be selected
from among those previously stored
- oscilloscope function