108
Shooting Functions
4
• Turn the rear e-dial (S) while pressing the m button to change the EV
compensation value. (p.119)
• The shutter speed can be set in increments of 1/3 EV or 1/2 EV. Set the
exposure steps in [1. EV Steps] of the [A Custom Setting 1] menu. (p.120)
• The proper exposure may not be obtained with the selected shutter speed
when the sensitivity is not set to [AUTO] (
p.95
).
Exposure Warning
If the subject is too bright or too dark,
the aperture value will blink on the
status screen and LCD panel and in
the viewfinder. If the subject is too bright, choose a faster shutter
speed. If it is too dark, choose a slower shutter speed. When the
aperture value indication stops blinking, you can take a picture with
proper exposure.
Use a commercially available ND (Neutral Density) Filter if the subject
is too bright. Use a flash if it is too dark.
To Next Page
Loading...
