Pentax K-5 - Using the Control Panel

40
Before Using Your Camera
1
While shooting, the current settings can be checked on the status screen.
You can also switch the display to the control panel and change settings.
Following, how to set [JPEG Quality] is explained as an example.
1 Check the status screen and then
press the M button.
The control panel appears.
Press the M button when the status
screen is not displayed.
2 Use the four-way controller
(2345) to select an item you
want to change the setting for.
You cannot select items that cannot be
changed in a given camera status.
While direct key operation is enabled, the guide indicators for the direct keys
are displayed in blue (when [Status Screen] (p.295) in the [R Set-up 1] menu
is set to [Display Color 1]). Direct key operation is not available when the AF
point switching dial is set to j and the AF point is being changed. In such
cases, press and hold the 4 button. (p.129)
Using the Control Panel
P
AF.S
1/
ISO
AUTO
2000 2.8
±0.0
±0±0
F
11223344+5 - 5
AWB
16M
[
37
]
1600
JPEG
11
11
16M
[
37
]
ISO AUTO Setting
Adjustment Range
ISO
AUTO
200-1600
JPEG
HDR
HDR
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
11
11