Pentax K-5 - Shooting while Adjusting the Settings (Auto Bracketing)

155
Shooting Functions
4
You can create a composite picture by taking multiple frames.
1 Select [Multi-exposure] in the [A Rec. Mode 2] menu and
press the four-way controller (5).
The [Multi-exposure] screen appears.
2 Use the four-way controller (23) to select [Number of
Shots].
3 Press the four-way controller (5)
and use the four-way controller
(23) to select the number of
shots.
Select from 2 to 9 shots.
4 Press the 4 button.
5 Use the four-way controller (23) to select [Auto EV
Adjustment] and use the four-way controller (45) to
select O or P.
When set to O (On), the exposure is adjusted automatically according to
the number of shots.
6 Use the four-way controller (23) to select [Start
Shooting] and press the 4 button.
The camera is ready to take a picture.
Multi-exposure
• Multi-exposure is not available in the following situations.
- when the exposure mode is set to B (Green) or C (Movie)
- when Digital Filter, HDR Capture or Cross Processing is set
• When Multi-exposure is set, the following functions are not available.
- Exposure Bracketing, Extended Bracketing or Interval Shooting (The
function selected last is used)
- Lens Correction
Multi-exposure
Cancel
MENU
Start Shooting
Number of Shots
Auto EV Adjustment
OK
OK
2times