Pentax K-5 - How to Change Function Settings; Using the Direct Keys

39
Before Using Your Camera
1
How to Change Function Settings
Function settings can be changed using the direct keys, control panel or
menus. Some functions can be changed using both the control panel and
menus.
This section explains the basic ways to change function settings.
In Capture mode, you can set Drive Mode, Flash Mode, White Balance and
Custom Image by pressing the four-way controller (
2345 ). (p.88)
Below, how to set [Flash Mode] is explained as an example.
1 Press the four-way controller (3)
in Capture mode.
The [Flash Mode] screen appears.
2 Use the four-way controller (45)
to select a flash mode.
3 Press the 4 button.
The camera is ready to take a picture.
Using the Direct Keys
Flash Mode
Flash On
Cancel
MENU
0.0
OK
OK