49
Getting Started
2
Inserting the Battery
Insert the battery into the camera. Use only a D-LI90 battery.
When using the battery for the first time, or when the battery has not been
used in a long time, or when [Battery depleted] appears, recharge the
battery.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible
cord, rated 125 V, 7A, minimum 6ft (1.8m)”
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Face the 2 mark on the exclusive battery up and insert it
into the battery charger.
The indicator lamp is lit during charging and turns off when the battery is
fully charged.
4
When the battery is fully charged, remove the battery from
the battery charger.
Charging the Battery
Lithium-ion battery
Battery charger
Indicator lamp
AC plug cord
3
1
2
To Next Page
Loading...
