Pentax K-5 - Adjusting the Brightness of the Monitor

297
Changing Additional Settings
9
You can adjust the brightness of the monitor. Adjust the settings when the
monitor is hard to see.
1 Select [Brightness Level] in the [R Set-up 2] menu and
press the four-way controller (5).
The [Brightness Level] screen appears.
2 Use the four-way controller (45)
to adjust the brightness.
You can select from 15 brightness levels.
The value is reset to ±0 when the |
button is pressed.
3 Press the 4 button.
4 Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Adjusting the Brightness of the Monitor
MENU
Brightness Level
±0
Cancel OK
OK
+2
+2