340
Appendix
11
Cleaning the CMOS Sensor
If the CMOS sensor becomes dirty or dusty, shadows may appear in the
image in certain situations such as when shooting against a white
background. This indicates that the CMOS sensor must be cleaned.
Dust adhering to the CMOS sensor is removed by applying ultrasonic
vibrations to the filter on the front surface of the CMOS sensor for
approximately one second.
1
Select [Dust Removal] in the [R Set-up 4] menu and press
the four-way controller (5).
The [Dust Removal] screen appears.
2
Press the 4 button.
The Dust Removal function is activated.
Set [Start-up Action] to O (On) to turn the
Dust Removal function on every time the
camera is turned on.
When Dust Removal is completed, the
camera returns to the [R Set-up 4] menu.
Removing Dust with Ultrasonic Vibrations
(Dust Removal)
Dust Removal
MENU
Dust Removal
Start-up Action
Start
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
