249
Playback Functions
7
Rotating Images
When pictures are taken with X held vertically, the vertical position
sensor activates and rotation information is added to the image to enable
playback with the correct image orientation. You can change the rotation
information and save the image using the following procedure.
1
Select the image you want to rotate in Playback mode.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select s (Image
Rotation) and press the 4 button.
The selected image is rotated in 90° increments and the four thumbnail
images are displayed.
4
Use the four-way controller
(2345) to select a desired
rotation direction and press the
4 button.
The image rotation information is saved.
• When [23. Saving Rotation Info] in the [A Custom Setting 4] menu (p.92) is
set to [Off], the image rotation information is not saved when shooting.
• When [Auto Image Rotation] (p.236) in the [Q Playback 1] menu is set to O
(On), an image with rotation information is automatically rotated during
playback.
You cannot change the image rotation information in the following conditions.
- when the image is protected
- when the image rotation information tag is not saved with the image
- when [Auto Image Rotation] (p.236) in the [Q Playback 1] menu is set to
P (Off)
MENU
OK
OK
Cancel
To Next Page
Loading...
Need help?
General
Weight and Dimensions
