229
6
Shooting Settings
3
Enter the text.
Up to 18 single-byte
alphanumeric
characters and
symbols can be
entered.
Available operations
4
After entering the text, move the text selection cursor to
[Finish] and press the 4 button.
The name is changed.
Repeat Steps 2 to 4 to change the names of other A modes.
5
Press the 3 button.
1
Select [Check Saved Settings] in Step 3 of “Saving the
Settings” (p.227) and press the four-way controller (5).
The [Check Saved Settings] screen appears.
2
Use the four-way controller (23) to select [A1] to
[A5] and press the four-way controller (5).
The current settings saved in the selected A mode are displayed.
Four-way controller
(2345)
Moves the text selection cursor.
Rear e-dial (S) Moves the text input cursor.
| button
Switches between upper and lower case letters.
4 button
Enters a character selected with the text selection
cursor at the position of the text input cursor.
i button Deletes a character at the position of the text
input cursor.
Checking the Saved USER Settings
Rename USER Mode
USER1
Cancel
Delete One Character
Enter
Finish
OK
MENU
USER
1
Text selection
cursor
Text input cursor
To Next Page
Loading...
Need help?
General
Weight and Dimensions
