274
Processing Images
8
Specify the parameters for developing RAW images.
The following parameters can be changed.
*1 This cannot be set when [File Format] is set to [TIFF]. (The setting is fixed to p.)
*2 This cannot be set for RAW files taken in Multi-exposure mode.
*3 This can be selected only when a compatible lens is attached. (p.337)
1
Press the four-way controller
(23) in Step 4 on p.271 to
choose the parameter you want
to change.
Specifying the Parameters
Parameter Value Page
File Format JPEG/TIFF -
Recorded Pixels
*1
p (4928×3264)/J (3936×2624)/
P (3072×2048)/i (1728×1152)
p.200
Quality Level
*1
Z (Premium) / C (Best) / D
(Better) / E (Good)
p.201
Custom Image
Bright/Natural/Portrait/Landscape/Vibrant/
Muted/Bleach Bypass/Reversal Film/
Monochrome
p.222
White Balance
*2
F (Auto)/G (Daylight)/H (Shade)/
^ (Cloudy)/JD (Fluorescent Light
Daylight Color)/JN (Fluorescent Light
Daylight White)/JW (Fluorescent Light
Cool White)/ JL (Fluorescent Light Warm
White)/I (Tungsten Light)/L (Flash)/
f/K (Manual)/K (Color Temperature)
p.205
Sensitivity -2.0 to +2.0 -
High-ISO NR Auto/Off/Low/Medium/High p.98
Shadow Correction Off/Low/Medium/High p.214
Distortion Correction
*3
Off/On p.218
Lat-Chromatic-Ab Adj
*3
Off/On p.218
Color Space sRGB/AdobeRGB p.212
MENU
File Format
16
M
sRGB
RAW
JPEG
OK
100-0001
ISO
NR
To Next Page
Loading...
