Pentax K-5 - Page 127

125
Shooting Functions
4
3 Press the four-way controller (5)
and use the four-way controller
(23) to select [Enable AF].
4 Press the 4 button.
5 Press the 3 button three times.
The camera is ready to take a picture.
6 Press the = button while
looking through the viewfinder.
Autofocus is performed.
7 Press the shutter release button.
When [Enable AF] is assigned to [Shutter Button Half Press] in [Button
Customization], press the shutter release button while holding down the
= button.
The picture is taken.
Enable AF
Autofocus is performed by using the = button or the
shutter release button. (default setting)
Cancel AF
\ appears in the viewfinder while the = button is
pressed. Autofocus is not performed when the shutter
release button is pressed. (Take your finger off the =
button to return to normal autofocus mode.)
l
Single mode
When the = button is pressed and the subject comes
into focus, the Focus Lock function is activated while
the button is pressed.
k
Continuous mode
The subject is kept in focus while the = button is
pressed.
AF Button
Cancel OK
OK
MENU
AF is performed when
the AF button is pressed
Enable AF
Cancel AF