146
Shooting Functions
4
1
Mount the camera onto a tripod.
2
Press the four-way controller (2) in Capture mode.
The [Drive Mode] screen appears.
3
Use the four-way controller (45) to select h.
4
Press the four-way controller (3)
and use the four-way controller
(45) to select h, i, or i.
W appears on the LCD panel. The self-
timer lamp will blink and the camera is in
a stand-by status.
5
Press the 4 button.
The camera is ready to take a picture.
6
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the
viewfinder when focused.
Drive Mode
Remote Control
Cancel
MENU
MUP
OK
OK
To Next Page
Loading...
