206
Shooting Settings
6
1
Press the four-way controller (4) in Capture mode.
The [White Balance] screen appears.
After the power is turned on, the last image taken is displayed in the
background.
2
Use the four-way controller
(23) to select the white balance.
Available operations
3
Press the 4 button.
The camera is ready to take a picture.
Main switch (|) Uses Digital Preview to preview the background
image with the setting applied.
L button Saves the background image. Select [Save as] and
press the 4 button.
• The camera automatically performs fine-tuning even when the light source is
specified. The color temperature of the light source is fixed when [10. WB
Adjustable Range] is set to [Fixed] in the [A Custom Setting 2] menu (p.91).
• Because the light source changes when a flash discharges, you can set the
white balance for when the flash discharges. Select [Auto White Balance],
[Unchanged] or [Flash] in [11. WB When Using Flash] of the [A Custom
Setting 2] menu (p.91).
Cancel Check
White Balance
Auto
OK
OK
MENU
AE.L
CTE
K1
To Next Page
Loading...
