223
6
Shooting Settings
1
Press the four-way controller (5) in Capture mode.
The screen to select a custom image appears.
After the power is turned on, the last image taken is displayed in the
background.
2
Use the four-way controller (45)
to select an image finishing tone.
3
Use the four-way controller (23)
to choose a parameter you want
to change.
4
Use the four-way controller (45) to change the setting.
The background image changes according to the settings.
You can visually check the saturation and hue with the radar chart.
Image finishing tone is fixed to [Bright] and the parameters cannot be changed
in the following conditions.
- when the exposure mode is set to B (Green)
- when Cross Processing is set
Bright
Cancel Check OK
OK
MENU
AE.L
R
Y
G
C
B
M
R
Y
G
C
B
M
F
EX
Cancel Check OK
OK
MENU
AE.L
R
Y
G
C
B
M
R
Y
G
C
B
M
F
Portrait
EX
To Next Page
Loading...
Need help?
General
Weight and Dimensions
