226
Shooting Settings
6
The outcome of cross processing varies each time a picture is taken. If you
are able to take a cross processed image that you like, you can save the
Cross Processing settings used in that image. A total of 3 Cross
Processing settings can be saved for still pictures and movies.
1
Use the four-way controller
(23) to select [Save Settings] in
Step 2 on p.225 and press the
four-way controller (5).
The camera will search for cross
processed images starting from the most
recent image taken. (An hourglass icon is
displayed while searching.) When a cross
processed image is found, the screen to save the settings appears.
If there are no cross processed images, the message [No cross
processed image] appears.
2
Turn the front e-dial (R) to
select a cross processed image.
3
Use the four-way controller (23) to select [Save as
Favorite 1], [Save as Favorite 2] or [Save as Favorite 3] and
press the 4 button.
The setting of the selected image is saved to [Favorite 1 - 3].
4
Press the 3 button twice to finish saving.
Saving the Cross Processing Setting of a Captured Image
To save Cross Processing setting for movies, set from [Movie] in the [A Rec.
Mode 4] menu with the mode dial set to C (Movie).
Cross Processing
Cross Processing
MENU
Save Settings
OFF
100-0001
1
Cancel OK
OK
MENU
Save as Favorite 3
Save as Favorite 2
Save as Favorite 1
Saves this image's Cross
Processing settings
To Next Page
Loading...
