56
Getting Started
2
Push the SD Memory Card in once to
remove.
4
Close the card cover (3) and
then slide it in the direction of the
arrow (4).
Be sure to fully close the card cover. The camera will not turn on if the card
cover is open.
Precautions When Using the SD Memory Card
• The SD Memory Card is equipped with a
write-protect switch. Setting the switch to
LOCK prevents new data from being
recorded on the card, the stored data from
being deleted, and the card from being
formatted by the camera or computer.
• The SD Memory Card may be hot when removing the card immediately after
using the camera.
• Do not remove the SD Memory Card or turn off the power while the card is
being accessed. This may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away
from water and store away from high temperatures.
•
Do not remove the SD Memory Card while formatting. The card may be
damaged and become unusable.
• Data on the SD Memory Card may be deleted in the following circumstances.
We do not accept any liability for data that is deleted if
(1) the SD Memory Card is mishandled by the user.
(2)
the SD Memory Card is exposed to static electricity or electrical interference.
(3) the SD Memory Card has not been used for a long time.
(4) the SD Memory Card or the battery is removed while the card is being
accessed.
4
3
Write-protect
switch
To Next Page
Loading...
Need help?
General
Weight and Dimensions
