Perfect Point E-Drill - Description of Symbols Used in Product Labeling

15192 Triton Lane
Huntington Beach, CA 92649
Office Tel: 714-892-3400
Hotline Tel: 714-891-6533
www.ppedm.com
User Guide
Document No.
61-101
Revision:
107
Date:
10/18/2018
This document is the property of PPedm Corp. and contains proprietary and/or patented information and may not be reproduced in
part or in whole without the express written permission of the company. Perfect Point logo, Perfect Point
TM
and E-Drill
®
are
trademarks of PPedm, Corp. US and worldwide patents pending.
Page 11 of 76
Description of Symbols Used in Product Labeling:
Symbol
Publication
Description
IEC 348
Attention, consult accompanying
documents
IEC 417-5036
Dangerous voltage
ANSI Z535.4–2007
Read and understand manual before
operation
IEC70794
Input
IEC70795
Output
IEC5020
Chassis Ground
IEC5007
ON Power
IEC5008
OFF Power
IEC5031
Direct Current (DC)