Perfect Point E-Drill - Cp1-Sy

15192 Triton Lane
Huntington Beach, CA 92649
Office Tel: 714-892-3400
Hotline Tel: 714-891-6533
www.ppedm.com
User Guide
Document No.
61-101
Revision:
107
Date:
10/18/2018
This document is the property of PPedm Corp. and contains proprietary and/or patented information and may not be reproduced in
part or in whole without the express written permission of the company. Perfect Point logo, Perfect Point
TM
and E-Drill
®
are
trademarks of PPedm, Corp. US and worldwide patents pending.
Page 7 of 76
3.3 MAINTENANCE SCREENS ............................................................................................................................... 48
3.4 SYSTEM “TOP OFF”: .............................................................................................................. 48
3.5 EMPTY SEDIMENT TANK ................................................................................................................................. 49
3.6 REPLACE FILTER ............................................................................................................................................. 51
3.7 SYSTEM BLEEDING AND CHARGING PROCEDURE .................................................................................... 53
3.8 CHECKING VACUUM AND PRESSURE (CP1-SY-151 ONLY): ....................................................... 53
3.9 WEEKLY MAINTENANCE ................................................................................................................................. 54
3.10 GROUND PIN ADJUSTMENT AND REPLACEMENT (APPLIES TO CG AND BG HAND-TOOLS ONLY): 54
3.11 DRAINING OF SYSTEM FOR STORAGE OR TRANSPORT.............................................................................. 56
4.0 APPENDIX 1. ADVANCED FUNCTIONS .......................................................................... 57
4.1 PASSWORD ENTRY .......................................................................................................................................... 57
4.2 ACCESSING ADVANCED FUNCTIONS ........................................................................................................... 58
4.3 CURRENT PART TAB – OVERRIDE LIBRARY SETTINGS ............................................................................ 58
4.4 SYSTEM TAB - OVERRIDE SYSTEM CUT PARAMETERS ............................................................................ 59
4.5 MANUAL TAB - RESET SYSTEM COUNTERS AND UPDATE PART NUMBER LIBRARY .......................... 59
5.0 APPENDIX 2. ADAPTER CHARTS AND CROSS REFERENCE DATA .......................... 60
5.1 ELECTRODES .................................................................................................................................................... 60
5.1.1 Electrode Information ................................................................................................................... 60
5.1.2 Electrode Material Usage ............................................................................................................. 61
5.1.3 Electrode Part Number Legend ..................................................................................................... 61
5.2 ELECTRODE GUIDES ....................................................................................................................................... 63
5.3 FLUSH HEAD LOCATING SYSTEMS .............................................................................................................. 64
5.3.1 Universal Flush Head Locator (FHL): ............................................................................................. 65
5.3.2 Aperture Seals............................................................................................................................... 65
5.3.3 FHL Adapter and Guide Assembly: ................................................................................................ 65
5.4 BUTTON HEAD LOCATING SYSTEM .............................................................................................................. 66
5.4.1 Fixed Diameter Button Head Locator (BHL) assembly: ................................................................. 66
5.4.2 Slimline Button Head Locators ...................................................................................................... 67
5.4.3 BHL Adapter and Guide Assembly: ............................................................................................... 68
5.5 VACUUM FLUSH HEAD LOCATOR SYSTEM ................................................................................................. 69
5.6 ACCESSORIES - S-BLASTER, PUNCHES, DRILL STANDS AND HOLSTERS, TOOLBOXES ETC ........... 69
5.7 CUSTOM ADAPTERS AND TOOLING .............................................................................................................. 69
6.0 APPENDIX 3. TROUBLE-SHOOTING GUIDE .................................................................. 70