WARNINGS:
This fastener removal system should
only be operated by factory trained
authorized operators.
The E-Drill system is designed, built and
calibrated to work with factory genuine
parts and accessories, the use of non-
authorized components, electrodes, or
accessories can result in airframe
damage, tool damage, personal injury, or
death. Lethal high voltages are present
throughout the Power Supply Cabinet.
Follow all Warning and Caution
statements outlined in this User Guide
and all equipment Warning placards. Do
not proceed with any periodic
maintenance until factory trained and
authorized, and this document has been
thoroughly reviewed and understood.
Only trained, authorized technicians
should attempt tool use, tool selection,
adjustments, dielectric system
replenishment, and periodic
maintenance. This unit is not field
repairable; if any malfunctions are
encountered please contact Perfect
Point
TM
EDM Corporation immediately for
service.
Product specifications are subject to
change, and photographs in this
document may not match the current E-
Drill product combinations exactly.
To Next Page
Loading...
