This document is the property of PPedm Corp. and contains proprietary and/or patented information and may not be reproduced in
part or in whole without the express written permission of the company. Perfect Point logo, Perfect Point
TM
and E-Drill
®
are
trademarks of PPedm, Corp. US and worldwide patents pending.
WARNING WARNING WARNING
The USE of Counterfeit Electrodes Can Cause Damage to the
E-Drill, Aircraft, Aircraft Components, and Aircraft Structures.
THIS IS A SERIOUS SAFETY ISSUE!
Perfect Point electrodes are manufactured to exacting
standards and are certified for use with E-Drill systems.
Performance and control are matched to specific alloys.
Concentricity, Depth Control, Cut Diameter and Electrode Life
will not be maintained outside of these specifications.
The USE of Counterfeit Electrodes Will Violate the E-Drill
System warranty and Perfect Point WILL NOT Service E-Drill
Systems that USE Counterfeit Electrodes
For the Protection of Your E-Drill System and the safety of the
Application for Which You Are Using the E-Drill
DO NOT USE COUNTERFEIT ELECTRODES!
Only genuine electrodes supplied in original Perfect Point
packaging should be used in your system! If you suspect you
have received COUNTERFEIT ELECTRODES, please contact
the Perfect Point Support Hotline to Report.
1-714-891-6533
WARNING WARNING WARNING
To Next Page
Loading...
