A notice:
If you are already connected to a device and now want to connect to
another device, the previous connection will be automatically
disconnected.
Important:
By establishing and disconnecting connections via the device list, the
automatic connection establishment is temporarily deactivated. After a
restart or, if necessary, changing the configuration, it will be activated
again.
If you would like to start the remote configuration for a device from the
list, click on the symbol a dialog is also displayed:
Here too, the selected device will be displayed again and you will be
asked to enter the password. You can then click on the “Start” button. If
the remote configuration could be started, a new window will then open
in which the web server of the selected device is displayed.
A notice:
If the remote configuration for a device has already been started but not
ended, it will be ended first. Parallel access to multiple devices via
remote configuration is not possible.
Important:
If the remote configuration was started successfully but no window opens
automatically, please make sure that your browser does not block pop-
ups.
Page 45 Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13
To Next Page
Loading...
Need help?
General