Router The device routes between the
WAN interface network
and the network of one
or multiple LAN interfaces.
WAN interface: The interface where the removed
Network (e.g. Internet) is connected.
LAN interface: The interface on which the local
network is connected. At the
Multiple selections of “Bridge” can be made
interfaces are used.
Bridge interfaces: The interfaces that lead to one
shared network should.
WAN routing: Specifies whether access to the devices in
the LAN from WAN should be possible.
LAN routing: Specifies whether access to the devices in
the WAN from the LAN should be possible.
Important:
The WAN and LAN interfaces must necessarily be different.
If the remote maintenance option is installed in your device, specify the
type of connection to the Internet and the use of the network interfaces in
the “Interfaces” block:
Connection type: local The remote maintenance
function of the device is
deactivated.
Page 55 Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13
To Next Page
Loading...
Need help?
General