EasyManuals Logo

PI CONNECT User Manual

PI CONNECT
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
CONNECT The device is between
the network and the PC
connected and used
the parameters from the
PC an internet connection
to build.
GATEWAY The device has its own
IP address and uses it
for a connection to the
build internet.
LTE The device uses the LTE
Modem to build
an internet connection.
Router interface: The interface on which the network is
connected the gateway or proxy server for
the Internet connection is connected.
PC interface: The interface on which the PC is used for
the automatic detection of internet
Parameter is connected.
Peripheral interface: The interface on which the network
Devices connected via the tunnel
devices of the partner device communicate
should be connected.
Remote access: Specifies whether access is from or to a
other device from your CONNECT cloud
should be possible.
A notice:
The local connection type is only available if the router option is installed.
The LTE connection type is only available on CONNECT devices with an
integrated LTE modem.
Important:
The router and PC interfaces must necessarily be different. The
peripheral interface, on the other hand, does not necessarily have to be
different from the router or PC interface.
Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13 Page 56

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PI CONNECT and is the answer not in the manual?

PI CONNECT Specifications

General IconGeneral
ModelPI CONNECT
CategorySwitch
Port Speed10/100/1000 Mbps
ManagementUnmanaged
MountingDesktop
Operating Temperature0°C to 40°C
Humiditynon-condensing
Ports8
Power over Ethernet (PoE)8 x PoE+ (802.3at)