HUNTER-PRO Series Installation Guide 49
5.3.3 Setting the Wireless Expander
To set the wireless expander parameters, first mark “+” under “W” in the expanders
menu (see previous section).
ENTR
1
Wireless Setup
ENTER/NEXT/END
ENTR
NE X T
Sys Installation
ENTER/NEXT/END
X2
9
Add Zone?
ENTER/NEXT/END
ENTR
Add Zone? 9
ENTER/NEXT/END
The first available zone appears (zone #9 is first, if no expander is installed). Press
[ENTR]
Add Zone?
Activate Device
. Trigger the wireless device and wait for confirmation
message:
Device added
Press END
.
The number of wireless zones & accessories varies according to the system. See the
table in section 1.1
The wireless zones are numbered only after all other zones,
including hardwired expanders
5.3.3.1 Deleting a Wireless Zone
ENTR
1
Wireless Setup
ENTER/NEXT/END
ENTR
NEXT
9
NEXT
Device Deleted
Press END
Delete Zone? 9
Please Wait...
….
Enter a zone
number
ENTR
Delete Zone?
Please Wait...
5.3.3.2 Supervision Interval for Wireless Zones
Add Zone?
ENTER/NEXT/END
Supervision:
ENTER/NEXT/END
Supervision:
Hrs:12 Min.s:0
ENTR1 ENT RNEXT
X2
9
ENTRBACK
5.3.4 Keypads
ENT R
1
K eyp ads S etup
E NTE R/NEX T/END
ENTRNE XT
X3
Keypads Setup
0
S ys I nst al lat io n
E NTE R/NEXT/END
ENT R
Enter th e numbe r of
installed keypads
Part. For RKD
++++++++++++++++
9
Set the number of monitored keypads (8 max.). Giving a different ID (other then zero,
which indicates a non-monitored keypad) to each will indicate the system to supervise
them, i.e. monitor their tampers. The IDs should be given consecutively from #1.
To Next Page
Loading...
