Pitco SSH Series User Manual

PitcoSolsticeandSolsticeSupremeHighEfficiencyGasFryers



SG/SSHSeriesServiceManual 62
7. Remove the two (2) screws from the valve
mounting brackets using a 5/16 socket.
8. Slide the bracket to the back of the assembly.
9. Lift bracket out and slide forward.
10. Bend down tabs of the stem nut washer using a
needle-nose plier.
11. Remove the nut using a 7/16 inch wrench.

Pitco SSH Series Specifications

General

Brand	Pitco
Model	SSH Series
Category	Fryer
Language	English