Pitco SSH Series - Replacing the Waste Oil and Components; Removing Rear Mounting Bracket

PitcoSolsticeandSolsticeSupremeHighEfficiencyGasFryers



SG/SSHSeriesServiceManual 65
ReplacingtheWasteOilandComponents
RemovingRearMountingBracket
1. Remove six (6) screws using a 5/16 socket
wrench.
2. Disconnect from the filter return line using a
1-1/16 inch wrench.
3. Remove two (2) screws with a 5/16 socket
wrench.