Pitco SSH Series - Replacing Seal Kit

PitcoSolsticeandSolsticeSupremeHighEfficiencyGasFryers



SG/SSHSeriesServiceManual 70
13. Remove existing piping from old filter pump
using two adjustable wrenches.
14. Reinstall a new filter pump by following steps 1
through 13 in reverse.
ReplacingSealKit
1. Remove the four (4) bolts on filter pump using
7/16 inch open-ended wrench.
3. Replace the seal.
4. Reinstall the filter pump head to the motor by
following steps 1 through 2 in reverse.
2. Rem
ove the filter pum
p head.